A comprehensive review of the main parts of Machine Parts Micro Screws

2025,08,06

Machine Parts Micro Screws are special process equipment that processes materials (metal or non-metal) into parts (or semi-finished products) in cold stamping, which is called cold stamping die (commonly known as cold stamping die).

Stamping is a pressure processing method that uses a die installed on a press to apply pressure to the material at room temperature, causing it to separate or plastically deform, thereby obtaining the required parts.

Machine Parts Micro Screws are the main process equipment for stamping. Machine Parts Micro Screws are completed through the relative movement of the upper and lower dies.

During processing, since the upper and lower dies are constantly separated, if the operator's fingers constantly enter or stay in the closed area of the die, it will pose a serious threat to their personal safety.

The punch is the working part that directly shapes the blank, so it is a key component of the die. The punch is not only precise but also complex and should meet the following requirements:

(1) It should have sufficient strength and cannot be broken or damaged during the stamping process;

(2) The material and heat treatment must have appropriate requirements to prevent excessive hardness and brittleness.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211