Strength and Rigidity of Mobile Devices Micro Screws

2025,08,08

All parts of Mobile Devices Micro Screws must have sufficient strength and rigidity to prevent damage and deformation during use. Fasteners must be secured against loosening to prevent accidental injury to the operator.

Waste or projectiles from workpieces must not be allowed during processing, as they could distract the operator or even injure them.

In addition, burrs on blanked parts must be avoided to prevent injuries to the operator's hands. Operators must not have excessive range of motion during stamping operations to prevent unstable postures.

Excessive and inaccurate movements are prohibited during operation. Strong noise and vibration should be minimized during stamping. The weight of Mobile Devices Micro Screws should be clearly indicated on the general drawing.

This facilitates installation and ensures safety. Parts weighing over 20kg should be lifted to reduce labor intensity. Disassembly of Mobile Devices Micro Screws should be convenient and safe to avoid pinching or cutting hands.

Molds should be easy to disassemble and store. In short, even minor mold problems can affect safety. Only by analyzing the specific issues in each operation can safety precautions in the mold be identified.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211