Understanding Mobile Devices Micro Screws Processing

2025,08,13

1. Enlarged drawings should be included for areas with multiple dimensions to avoid errors or omissions; areas requiring spray protection should be clearly marked. The expansion method used in sheet metal processing should be appropriate to both save material and ensure processing performance.

Appropriate clearance and hemming methods should be selected. For T-pieces under 2, the clearance should be 0.2, and for T-pieces between 2 and 3, the clearance should be 0.5. Hemming generally uses the long side wrapping the short side.

2. When bending, do not place a second part before removing the parts from the Mobile Devices Micro Screws. During blanking and punching, any parts that fall onto the cutting edge of the Mobile Devices Micro Screws must be promptly cleaned; otherwise, punching is not permitted.

3. After power is turned off, the use of a punching machine with a free-falling slide or continuous firing is strictly prohibited.

4. Do not operate the machine tool unless the Mobile Devices Micro Screws is securely fastened or the clearance is improperly adjusted.

5. Easily deformed parts and parts with easily scratched surfaces should be neatly arranged and boxed during processing; they should not be stacked.

6. For non-metallic parts, wipe the Mobile Devices Micro Screws and workbench clean before processing to avoid contamination.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211