What are some effective ways to manage wear and tear on Auto Parts Micro Screws?

2025,11,20

Stamping processes greatly aid in mold production, but wear and tear inevitably occurs during operation. What are some effective methods to address this? Here are a few helpful solutions:

Countersunk head hexalobular socket M2.0SUS304 galvanized automotive corrosion resistant screws

1. Replace worn Auto Parts Micro Screws guide components and punches promptly.

2. Check if the clearance of the auto parts Micro Screws is unreasonable (too small) and increase the lower die clearance.

3. Minimize wear by improving lubrication conditions, lubricating the sheet metal and punches. The amount and frequency of oiling depend on the material being processed.

For rust-free materials such as cold-rolled steel and corrosion-resistant steel, lubricate the mold at points such as the guide sleeve, oil inlet, and lower die. Use light machine oil.

For rust-containing materials, rust particles will be drawn into the space between the punch and guide sleeve during processing, creating dirt and preventing the punch from sliding freely within the guide sleeve.

In this case, applying oil will make the rust adhere even more easily. Therefore, when stamping such materials, the oil should be wiped clean first.

Disassemble the die monthly, using gasoline (or diesel) to remove dirt and grime from the punch and die. Clean them again before reassembling. This will ensure the die has excellent smoothness.

4. Improper sharpening methods can cause annealing of the die, accelerating wear. Use a soft abrasive wheel, a small depth of cut, sufficient coolant, and clean the wheel frequently.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211