What are the maintenance and care of Aerospace Micro Screws?

2025,07,26

1. After long-term use, Aerospace Micro Screws must sharpen the blade. After grinding, the blade surface must be demagnetized and cannot be magnetic, otherwise it is easy to cause blockage.

2. The springs and other elastic parts of Aerospace Micro Screws are most easily damaged during use, and usually break and deform. The solution is to replace them. During the replacement process, you must pay attention to the specifications and models of the springs. The specifications and models of the springs are confirmed by color, outer diameter and length. Only when the three items are the same can they be replaced.

3. During the use of Aerospace Micro Screws, the punches are prone to breakage, bending and gnawed, and the punch sleeves are generally gnawed. The damage of the punch and the punch sleeve is generally replaced with parts of the same specifications. The parameters of the punch mainly include the working part size, the installation part size, the length size, etc.

4. Fasten the parts and check whether the fastening parts are loose or damaged. The solution is to find parts of the same specifications for replacement.

5. Pressing parts such as pressing plates, PU rubber, etc., unloading parts such as stripping plates, pneumatic ejectors, etc. During maintenance, check the relationship between the accessories of each part and whether there is any damage, repair the damaged parts, check the pneumatic jack for leakage, and take measures according to the specific situation. If the air pipe is damaged, replace it.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211