All Products

Micro precision M1.8 flat head positioning pin

The Micro precision M1.8 flat head positioning pin is an extremely compact Mini screw designed for high-precision alignment of 0.3 mm thin-wall modules. With an outer diameter of 1.8 mm and a flat head thickness of 0.2 mm, it can achieve tight fit...

Micro ISO Pan Head Cross PWB2 SUS410 Precision Electronic Screws

The Micro ISO Pan Head Cross PWB2 SUS410 Precision Electronic Screw is an extremely compact Mini screw designed for PCB micro-area fastening. With a diameter of only 1.2 mm, the pan head of 2.0 mm can be completely sunk into the 0.4 mm copper foil...

Flat head pointed tail cross slot M0.6 micro precision screw SUS410

The Flat head pointed tail cross slot M0.6 micro precision screw SUS410 is an extremely compact mini screw, designed for 0.15 mm ultra-thin plates or micro plastic shells. The pointed tail can be directly tapped without pre-holes, and the flat head...

Cross large flat head M2.0 circuit board grounding nail

The Cross large flat head M2.0 circuit board grounding nail is a mini screw designed for high-density PCBs. It has a diameter of 2.0 mm and a head enlarged to 4 mm. It can achieve low-impedance grounding on a 0.8 mm copper foil layer. The...

Flat head hexagon socket M1.8 SUS304 galvanized UAV flight control board screws

Flat head hexagon socket M1.8 SUS304 galvanized UAV flight control board screw is a mini screw designed for high-density electronic compartments. The M1.8 fine thread combined with the flat head can be completely countersunk in a 1 mm thick...

CA 0.6*4 Stainless steel 410 flat head pointed tail self-tapping screws

CA 0.6*4 Stainless steel 410 flat head pointed tail self-tapping screw is an extremely compact mini screw, designed for one-time locking of 0.2 mm thin plates or micro plastic shells. The pointed tail with an outer diameter of 0.6 mm and a total...

Flat head cross M0.6 SUS410 mobile phone motherboard connection nail

The Flat head cross M0.6 SUS410 mobile phone motherboard connection nail is an extremely compact micro screw with a diameter of only 0.6 mm. It can be directly locked into a 0.25 mm thick FR-4 motherboard or magnesium-aluminum alloy middle frame....

CB0.6*4 D=1.5 Stainless steel 410 flat head flat tail self tapping screws

CB0.6*4 D=1.5 Stainless steel 410 flat head flat tail self tapping screw is an extremely compact mini screw, designed for permanent fixation of ultra-thin wall panels and high-density PCBs. With an outer diameter of only 0.6 mm and a head diameter...

Flat head flat tail cross M0.6 SUS304 mobile phone back panel screw

The Flat head flat tail cross M0.6 SUS304 mobile phone back panel screw is an extremely compact Mini screw designed for ultra-thin smartphones. With a diameter of only 0.6 mm, the flat head and flat tail structure enable it to be flush locked on the...

DIN912 M1.6*3 SUS 304 washed white cylindrical head hexagon socket machine screw (knurled)

DIN912 M1.6×3 SUS304 washed white cylindrical head hexagon socket machine screw (knurled) is an extremely compact Mini screw, designed for micro-assemblies with limited space and strict loads. The overall material is A2-70 grade SUS304 with a...

GB70.1 M2*12 SUS 304 white washed cylindrical head hexagon socket machine screw (without knurling)

GB70.1 M2*12 SUS 304 white washed cylindrical head hexagon socket machine screw (without knurling) is a mini screw that complies with national standards. It is designed for assembly scenarios with limited space but high strength requirements. The M2...

Hexagon socket head M2 SUS410 Heavy duty mechanical micro connector

The Hexagon socket head M2 SUS410 Heavy duty mechanical micro connector is a Mini screw that combines strength and micro size. It is designed for joints that still need to be lightweight under extreme loads. The thin rod with a diameter of 2 mm is...

Cylindrical head hexagonal slot M1.4 SUS410 rust-resistant industrial valve micro screw

The Cylindrical head hexagonal slot M1.4 SUS410 rust-resistant industrial valve micro screw is a high-performance Mini screw designed for compact space. With a diameter of only 1.4 mm, the cylindrical head with hexagonal slot can achieve high torque...

Small head diameter pan head cross screw M2.5 SUS304 industrial micro pump body fastener

The Small head diameter pan head cross screw M2.5 SUS304 industrial micro pump body fastener is a mini screw designed for industrial micro pump bodies. Its head diameter is reduced to 3.8 mm, which can be installed flush in narrow cavities; the...

Copper rivet 5.5*4 (tube length)

Copper rivet 5.5*4 (tube length) is a micro hollow rivet, which can be regarded as a Mini screw in the riveting field. With an outer diameter of 5.5 mm, a tube length of 4 mm, and a total length of 6.5 mm, it is made of highly conductive C2680...

Pan head slotted M1.4 equipment fasteners

The Pan head slotted M1.4 equipment fastener is a typical mini screw, designed for industrial scenarios with limited space and moderate load requirements. The small rod diameter of only 1.4 mm, with standard pitch, can be directly locked in thin...

GB845 M1.7*4 2.5 SUS 304 blackened

GB845 M1.7×4 2.5 SUS304 blackened mini screw is a precision fastener designed for high-density electronics and micro-machines. With a diameter of only 1.7 mm, a length of 4 mm, and a 2.5 mm pitch, it can be self-tapped and locked on a 0.3 mm thin...

Pan head cross slot M1.2 micro screw

Pan head cross slot M1.2 micro motor fixing screw is a Mini screw designed for securing the tiniest electric motors. Measuring only 1.2 mm in diameter, it fits perfectly into micro-motor housings where space is critical and weight must be minimized....

DIN912 M3*12 D=5.5 SUS 304 hexagon socket A2-70 screw

DIN912 M3*12 D=5.5 SUS 304 hexagon socket A2-70 screw is a mini screw that combines strength and precision. It uses A2-70 grade SUS304 stainless steel, with a tensile strength of 700 MPa and a cylindrical head diameter of 5.5 mm, which can still...

cylindrical head hexagonal slot high pressure fastener

The Anti-fatigue cylindrical head hexagonal slot M1.6 SUS410 hydraulic valve body high pressure fastener is a mini screw developed for extreme working conditions. The whole is made of hardened SUS410 stainless steel with a tensile strength of ≥1100...

Industrial rust-proof pan head cross slot M2.5 SUS410 corrosion-resistant nail

Industrial anti-rust pan head cross slot M2.5 SUS410 corrosion-resistant nail is a micro screw designed for stable connection under harsh working conditions. It is based on SUS410 stainless steel, and after passivation treatment, it is coated with...

Countersunk cross flat tail M2.0 copper precision gear fixing nail

The Countersunk cross flat tail M2.0 copper precision gear fixing nail is a miniature screw designed for fixing precision gears. It is made of copper, which has good conductivity and corrosion resistance. At the same time, the softness of copper...

Countersunk cross flat tail KB2 micro gearbox fastener

The Countersunk cross flat tail KB2 micro gearbox fastener is a micro screw designed for fastening precision machinery such as gearboxes. It is made of high-strength materials, has good mechanical properties and durability, and can withstand the...

SUS410 M3.0 cylindrical head hexagon socket heavy duty fixing screws

The SUS410 M3.0 cylindrical head hexagon socket heavy duty fixing screw is a high-precision screw designed for fixing heavy equipment that requires high strength and high reliability. It is made of SUS410 stainless steel, which has high hardness and...