Anti-cracking methods for Robot Micro Screws
2025,07,26
1. Drawing process of
Robot Micro Screws: The contact area between the punch and the blank should be as large as possible in the drawing direction, the reasonable shape of the blank holder surface and the blank holder force should make the resistance of each part of the blank holder surface uniform and moderate, reduce the drawing depth, open process holes and process cuts, etc.
2. Structural design of Robot
Micro Screws: During the design process, the radius of each fillet should be large, the actual depth of the curved surface shape in the stretching direction should be shallow, the depth should be uniform everywhere, the shape should be as simple as possible, and the change should be as gentle as possible.
3. Mold design of Robot Micro Screws: Measures such as reasonable design of draw ribs, increase of mold fillet, and reasonable design of the gap between the punch and the die can be taken.
During the processing of Robot Micro Screws, many faults such as cracking will occur, and the processing plant employees need to carry out reasonable design and careful operation to prevent and reduce the occurrence of bad phenomena in Robot Micro Screws and improve product quality.
