How to prevent damage to Robot Micro Screws
2025,07,26
1. Sliding support hinges shall not be made of aluminum alloy, but stainless steel.
2. For sliding windows with a width of more than 1 meter, or doors and windows with double-glazed windows, double pulleys should be installed, or dynamic pulleys should be used.
3.
Robot Micro Screws metal should be installed last, and door and window locks, handles, etc. should be assembled after the window and door panels are inserted into the frame to ensure accurate positioning and flexible switching.
4. When installing Robot
Micro Screws with fastening screws, metal lining plates must be installed inside, and the thickness of the lining plates should be at least twice the pitch of the fasteners. It shall not be fastened to plastic profiles, and non-metallic linings shall not be used.
5. The model, specification and performance of Robot Micro Screws shall comply with the current national standards and relevant regulations, and shall match the selected plastic steel doors and windows.
6. After the Robot Micro Screws is installed, it should be maintained to prevent rust and erosion. In daily use, it should be closed and opened gently to prevent hard closing and hard opening, which may cause damage.
