Main measures to prevent Aerospace Micro Screws from becoming waste

2025,07,26

Many products used in our lives are processed by Aerospace Micro Screws manufacturers, but friends who are engaged in Aerospace Micro Screws processing know that if there is no correct operation, it is very likely that Aerospace Micro Screws will become waste during the processing process.

1. The raw materials used in Aerospace Micro Screws manufacturers must comply with the specified technical conditions, strictly check the specifications and grades of the raw materials, and at the same time, conduct chemical inspections on workpieces with high dimensional accuracy and surface quality requirements.

2. The presses and dies used must be in normal working conditions before they can work.

3. All links specified in the process regulations must be fully and strictly followed.

4. During the stamping process, the mold cavity must be kept clean, the workplace must be organized, and the processed workpieces must be placed neatly.

5. Establish a strict inspection system during the production process. The first piece of Aerospace Micro Screws must be fully inspected and can only be put into production after passing the inspection. At the same time, strengthen inspections and deal with accidents in a timely manner.

6. Adhere to the civilized production system. For example, the transmission of workpieces and blanks must use appropriate station equipment, otherwise the surface of the workpiece will be crushed and scratched, affecting the surface quality of the workpiece.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211