Requirements for Robot Micro Screws forming performance
2025,07,26
For the forming process, in order to facilitate stamping deformation and improve the quality of parts, the material should have good plasticity, small yield strength ratio, large plate thickness directional coefficient, small plate plane directional coefficient, and a small ratio of the material's yield strength to elastic modulus.
For the separation process, the material does not need to have good plasticity, but it should have a certain plasticity. The better the plasticity of the material, the harder it is to separate.
Specify the processing costs of parts with appropriate manufacturing accuracy and surface roughness. The processing cost of
Robot Micro Screws will increase with the improvement of accuracy, especially in the case of high accuracy, this increase is extremely significant.
Therefore, high accuracy should not be pursued without sufficient basis. Similarly, the surface roughness of Robot
Micro Screws parts should also be appropriately specified according to the actual needs of the mating surface.
The processing technology of Robot Micro Screws is relatively complex. In order to ensure that the performance of Robot Micro Screws products can meet the use requirements, it is necessary to follow the corresponding process requirements to ensure production feasibility.
