Robot Micro Screws shearing method
2025,07,26
In
Robot Micro Screws processing, shearing is one of the most basic processes. Reasonable selection of Robot
Micro Screws shearing equipment, according to the size of the production batch, the geometric shape and size of the Robot Micro Screws sheared are different.
It is suitable for Robot Micro Screws sheets with a thickness of less than 1 mm. Robot Micro Screws blanks or semi-finished products are hand shears and shears.
It is suitable for straight or curved Robot Micro Screws blanks with a thickness of 2 mm. It is a vibrating shear; its shear blade is close to the fixed lower shear blade and reciprocates rapidly, and the number of reciprocating times can reach 1200-2000 times per minute;
Shearing on a disc; its scissors are all disc-shaped, and the upper and lower disc knives rotate at the same speed and in relative directions during shearing. The sheared stamping sheet enters the blade by the friction between the half of the material and the blade to complete the shearing;
There are two types of shearing on the gantry shearing machine: flat blade shearing machine and oblique blade shearing machine. The upper and lower blades of the flat blade shearing machine are parallel, and the Robot Micro Screws sheet is sheared simultaneously over the entire width during operation. The straightness of the sheared blank is relatively good.
