Problems that may occur during the processing of Robot Micro Screws
2025,07,26
Robot Micro Screws sometimes have scratches or pits on the sheet before processing. There are many possibilities for this situation.
No matter what the scratches and pits are caused by, we must prevent and solve them in advance. Let's take a look at the causes of scratches or pits on Robot
Micro Screws sheets.
First of all, from the raw materials, the material workers should check whether there are scratches or pits on the surface of the raw materials before unloading. If there are serious scratches, the quality of Robot Micro Screws should be the first principle, and the raw materials should be returned. For minor scratches, pits or attachments on the sheet, the unloading workers are required to use white cleaning cloth for sanding before unloading.
In the process of Robot Micro Screws processing, stamping is mainly completed by the mold. The adjustment method of the mold gap is very important. If the mold gap is small, the roundness error of the processed parts is small, and the surface of the parts may also be scratched.
Before processing Robot Micro Screws, the mold working surface must be checked. If there are bumps on the mold working surface, it must be sanded. At the same time, the mold working surface must be wiped clean before processing. In addition, during the stamping process, if there is any debris such as slag falling from parts, it must be handled in time to avoid the phenomenon of padding during the stamping process of parts.
