Improve the surface quality of Robot Micro Screws
2025,07,26
Parts are damaged by film during stamping; in order to improve the surface quality of
Robot Micro Screws, stainless steel parts are sometimes treated with film to protect the surface quality of parts.
After the Robot
Micro Screws is processed, the film is torn off. This film process improves the surface quality of the parts, but there are differences in the quality of the film applied to the sheet.
Sometimes bubbles or film fall off occur, resulting in part padding during the stamping process. Therefore, while requiring the quality of film, the quality awareness of operators should also be improved. The bubbles and film fall off of the film should be handled in time to truly strictly control the surface quality of parts;
Robot Micro Screws are also prone to scratches, padding and other surface quality problems during processing and placement, especially the way parts are taken during processing and the way they are placed in the parts basket after processing.
The placement of parts in the basket directly affects the degree of bumps and scratches on the surface of Robot Micro Screws, so we require that after each process of parts processing, they must be placed in a single layer and separated layer by layer with a plastic flat net to effectively prevent the occurrence of bumps and scratches on parts.
