Temperature Regulation and Control of Precision Electronics Micro Screws

2025,09,04

Preheating: Before die-casting, Precision Electronics Micro Screws are preheated to a temperature typically between 150°C and 180°C. This prevents the molten metal from cooling rapidly, which can reduce fluidity, improves the toughness of the Precision Electronics Micro Screws, and reduces temperature fluctuations, thus protecting the vehicle.

Cross large flat head M2.0 circuit board grounding nail

Operating Temperature: During continuous die-casting, the operating temperature of Precision Electronics Micro Screws is typically between 180°C and 280°C. This temperature range ensures good fluidity of the molten metal while preventing overheating.

Cooling: After die-casting, Precision Electronics Micro Screws require cooling. Cooling methods include air cooling, water cooling, and oil cooling. The appropriate cooling method and intensity are selected based on the wall thickness of the casting and the structure of the Precision Electronics Micro Screws.

Temperature Monitoring: Temperature sensors and mold temperature controllers are used to monitor and adjust the temperature of the Precision Electronics Micro Screws in real time, ensuring it remains within the appropriate range.

Author:

Mr. yjfastener

E-mail:

hou@citool.com

Phone/WhatsApp:

+8615826187211